Bryan and Associates

Ron Sauls is one of the most experienced airgun repair and tuners in the business. He has been messing with airguns for over 35 years. And now, with Jim Giles of The Crooked Barn, they have put together Airgun Hobby Magazine. This is a quarterly publication devoted to the best hobby in the world...stamp collecting. HA!!!

Factory Authorized Repair Station for Benjamin, Crossman, Daisy and Sheridan

NEW

Ron and Jim have developed two new products. The BOSS valve and a repeating breech for the 22XX guns. I have not received my breech yet but it is on the way.

REVIEWS

2240 "BOSS" Repeater Breech

The BOSS Repeater breech has an in-line tubular magazine that holds 25 Crosman round nose pellets. Other pellets and pellet lengths my be used. Each hex. alum breech is dovetailed for a scope and is milled to allow use of the standard Crosman rear sight. The BOSS repeater breech is available with the bolt and magazine on the left side, LH model, or with the bolt and magazine on the right side, RH model. The BOSS Repeater breech consist of; breech, loading slide, magazine, magazine end plug, pellet stop, barrel/magazine support, and mounting screws.                      Remove the magazine end plug, insert pellets, skirt first, in the magazine, replace the plug.  Open the bolt, push the loading slide to the loading position. The barrel should be tilted slightly up. The  pellet stop holds the second pellet in the magazine allowing the rear pellet to drop into the loading slide. return the slide to the firing position, close the bolt. Aim and fire.
Click picture to enlarge	Click picture to enlarge	Click picture to enlarge

http://www.bryanandac.com/

TO ORDER: EMAIL

HOME