Best of the Best
Rich Howell's 2260 Hand Cannon
2260 chrome tube with custom aluminum bulk fill cap and pressure guage 0-1200psi
B/A Boss valve ported and new spring with a matching ported 7.5"barrel 22cal.
Polished aluminum 1"dia x 13" long internally vented shroud with brass end caps
RJ Machine Riser Breech
Custom Brass knob w/o-rings w/ s.s.handle and extended probe and Brass breech cap
Black and White Laminate grips by Rick
Chrome trigger shoe and alum.trigger spring guide
Tasco Pro-Class IR2x22PA 2x22mm polished aluminum very hard to find scope has Illuminated red triangle a center btm of cross-hairs with adjustable Intensity
So-Low scope mount
This baby shines so bright outside It makes your eyes bleed LOL
Mig Rod's Camo 1322
Just wanted to show my 1322
|I finally finished my
new 2250 MasterWolf and wanted to share.
It's been 6 months and lot of work in the making and
still to come, is a 11mm to weaver scope adaptor and power adjustor - but they are just icing on the cake
It's got the 24" barrel and custom silencer specially designed for co2, RJ Machine Long breech and extended bolt
added the 2260 tube to it with a 2240 barrel band to keep it all in place,B & A BOSS valve and tube bulk kit
custom port and transfer mod,Trigger tune and hammer spring re-jig, 2 stage seer
Bipod from NcStar with custom tube mount modification
still to come
11mm dovetail to Weaver/Picatinnay adaptor for the top rail, side/bottom rail mounts
power adjustor,HDD - if i can ever find on that works with RJ's breech, or
lightened/custom hammer mod,possible tank bulk mod as a back up for when out in the bush
so a slightly insane project, but loads of fun
|Andy in NC's 1377/22 Carbine|
|Wider trigger face from 1/16" x 1/4"
brass stock soldered on the trigger
Sear spring work including a .22lr rat shot brass for a spring guide
2289 barrel, barrel band and bolt
760 forearm and front sight
Hand guard made from original 1377 forearm
Ruger 10/22 scope rail
Home-made shoulder stock from wood
The 1377 forearm was drilled and filed to fit over the barrel. 8-32 allen-headed set screws are threaded into the rear roll pin holes to lock the piece to the barrel. Also small plastic shims were glued onto the inside of the rear of the piece to fit it tight to the receiver. This helps prevent the barrel and the scope mount from twisting. The design of the 2289 barrel band also helps keep the barrel tight. I wouldn't want to use this for a really heavy scope, but the red dot is fine.
The shoulder stock is made of three layers of 1/2" plywood. It and the forearms pieces are painted with a Rust-Oleum texture spray paint with a finish coat of Krylon kahki camo spray paint. An ATI slip-on SKS dragunov stock butt pad brings up the rear of the shoulder stock.
Darren's Black Walnut Discovery Stock
The first custom stock for a Discovery pistol that I have seen. Very NICE!
Darren's matched pair of cherry finished 1377 grips and forearms
I made these last summer for my brother's 2 boys,
got them done just in time for squirrel hunting, both have had their
cherry wood popped, the guns I mean.
Jeff S. Lastest 2250
|Mostly a dress up.
Only mod inside is ice maker tube mod. Cap and power adjuster by Art.
Breech by Crooked Barn bolt by Roy I polished the stock barrel band.
Shoots between 580-610 depending on weather. Scope is Sportview. You
just can't beat the RB Grips work.
A nice looking 2240
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24